K&M - Controlled Depth Reamer Alliant Optimal ergonomics

Optimal ergonomics

But it is also used for some other cartridges in that same 'family' which are the same case length as the parent case

PATENT PENDING POWDER DISPENSE FUNCTION

so there is no need to use power drills or purchase separate motors

•When your tool is in storage wipe a light oil on the tool steel shaft

K&M - Controlled Depth Reamer Alliant Optimal ergonomicsThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even